根据网络拓扑和要求说明，完成（或解释）路由器R1 的配置： R

简答题 根据网络拓扑和要求说明，完成（或解释）路由器R1 的配置： R1#config R1(config)# interface FastEthernet 0/1 R1(config-if)#ip address (1) (2) R1(config-if)#no shutdown R1(config-if)#exit R1(config)#ip dhcp pool vlan 3 R1(dhcp-config)#network 192.168.3.0 255.255.255.0 R1(dhcp-config)#default-router 192.168.3.254 255.255.255.0 ; (3) R1(dhcp-config)#dns-server 192.168.2.1 ; (4) R1(dhcp-config)#lease 0 8 0 ; (5) R1(dhcp-config)#exit R1(config)#ip dhcp pool vlan 4 R1(dhcp-config)#network (6) (7) R1(dhcp-config)#default-router 192.168.4.254 255.255.255.0 R1(dhcp-config)#dns-server 192.168.2.1 R1(dhcp-config)#lease 0 8 0 R1(dhcp-config)#exit R1(config)#ip dhcp excluded-address (8) (9) R1(config)#ip dhcp excluded-address 192.168.3.254 //排除掉不能分配的IP 地址 R1(config)#ip dhcp excluded-address 192.168.4.254 R1(config)# (10) 192.168.3.0 255.255.255.0 FastEthernet0/1 //在以太网接口和VLAN3 间建立一条静态路由

热门试题